Still searching?learn more

Hiller 12E Bubble, Engine, Main Rotor, Tail Rotor, & Blade Covers

Hiller 12E Bubble, Engine, Main Rotor, Tail Rotor, & Blade Covers

Immagini dei Prodotti:

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

CLICK on any small image to enlarge, or
CLICK on arrows to view next image

ID del Prodotto

Nome del prodotto

Prezzo Unitario

close= Bruce's Comments, Photos, Info & More.
= Product Photos, Etc.
= Items that have expedited delivery.

Quantità

Carrello

Prodotti:
Try Our New Product Filter
×

Only want to see some of our products?

Use the Product Filter Checkbox List to only see the products that interest you.

Section 1: Cockpit/Bubble Covers

2 Products, 2 Photos

UH12-000

COPERCHIO BOLLA (MODELLO 12B)

$ 895.00

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 35 (entrambi i lati).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Hiller 12B & 12E Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... per saperne di più

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... per saperne di più

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... per saperne di più

UH12-010

COPERCHIO BOLLA (MODELLI NON 12B)

$ 895.00

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 35 (entrambi i lati).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Hiller 12B & 12E Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... per saperne di più

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... per saperne di più

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... per saperne di più

Section 2: Engine/Tail Rotor Covers

13 Products, 5 Photos

UH12-100

COPERCHIO MOTORE

$ 870.00

Product Options & Information..............................................................................................................

  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... per saperne di più

UH12-101

COPERCHIO MOTORE ISOLATO

$ 1175.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

The Hiller 12B & 12E Insulated Engine Cover works well in cold climates to help with engine preheating. You can add an access flap for an additional fee. It will cinch around or behind the spinner, cover the entire engine cowl area including the engine air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling.... per saperne di più

Insulated Covers Material - A special composite material of solution-dyed polyester, 3M Thinsulate insulation, and soft nylon interior fabric. Our insulated covers are designed to complement an engine preheater and help retain heat in the engine compartment after shutdown. If you operate your aircraft in cold-weather, these covers will help prevent engine wear and tear.... per saperne di più

UH12-105

COPERCHIO MOTORE, esteso per sovrapporsi con coperture Bubble & Tailboom

$ 920.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... per saperne di più

UH12-106

COPERCHIO MOTORE ISOLATO, esteso per sovrapporsi con coperture Bubble & Tailboom

$ 1240.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Hiller 12B & 12E Insulated Engine Cover works well in cold climates to help with engine preheating. You can add an access flap for an additional fee. It will cinch around or behind the spinner, cover the entire engine cowl area including the engine air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling.... per saperne di più

Insulated Covers Material - A special composite material of solution-dyed polyester, 3M Thinsulate insulation, and soft nylon interior fabric. Our insulated covers are designed to complement an engine preheater and help retain heat in the engine compartment after shutdown. If you operate your aircraft in cold-weather, these covers will help prevent engine wear and tear.... per saperne di più

UH12-110

ENGINE COVER (Soloy Conversion)

$ 510.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... per saperne di più

UH12-111

COPERCHIO MOTORE ISOLATO (conversione Soloy)

$ 710.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

The Hiller 12B & 12E Insulated Engine Cover works well in cold climates to help with engine preheating. You can add an access flap for an additional fee. It will cinch around or behind the spinner, cover the entire engine cowl area including the engine air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling.... per saperne di più

Insulated Covers Material - A special composite material of solution-dyed polyester, 3M Thinsulate insulation, and soft nylon interior fabric. Our insulated covers are designed to complement an engine preheater and help retain heat in the engine compartment after shutdown. If you operate your aircraft in cold-weather, these covers will help prevent engine wear and tear.... per saperne di più

UH12-120

COPERCHI DI SCARICO (Soloy Conversion) (set di 2)

$ 230.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

UH12-301

ROTOR HUB COVER (versione ridisegnata)

$ 315.00

Product Options & Information..............................................................................................................

  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.... per saperne di più

UH12-400

COPERCHI LAMA (set di 2)

$ 510.00

Product Options & Information..............................................................................................................

  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

Bruce’s Hiller 12B & 12E Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... per saperne di più

UH12-410

COPERCHI LAMA, tipo freddo (set di 2)

$ 740.00

Product Options & Information..............................................................................................................

  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

Bruce’s Hiller 12B & 12E Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... per saperne di più

UH12-500

BLADE TIE-DOWNS (fabric type) (set of 2)

$ 220.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

Blade Tie-Downs are "socks" which fit over the blade tip with or without Blade Covers installed. Front blade tie-downs have two lengths of rope or strap which attaches to the front cross tubes on either side of the cabin. The other tie-downs have generous lengths of rope or strap to tie the blades down at any convenient spot.... per saperne di più

UH12-601

TAIL ROTOR COVER

$ 220.00

Product Options & Information..............................................................................................................

  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

The Hiller 12B & 12E Tail Rotor Cover is a one-piece design which encloses both the blades and their hub, snapping closed along the bottom edge. The tail rotor cover is normally made from Solution-Dyed Polyester.... per saperne di più

ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... per saperne di più

WINTER USE MATERIAL - Made with Solution-Dyed Polyester fabric, this option is intended for seasonal use to aid in deicing, rain mitigation, or for occasional travel. The material is lighter and more compact, but more susceptible to UV damage and may have a shorter useful life if used continuously outside than the all-year use material.... per saperne di più

UH12-610

TAIL ROTOR BLADE TIE-DOWNS (set of 2)

$ 145.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • Some installation parts are required for this item, usually small metal snaps.
  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

Tail Rotor Tie-Downs are a similar design to the main blade tie-downs. Stout bungee cords attached to the tie-down socks pull the rotor tips back toward the hub, pulling the tail rotor back to a secure position.... per saperne di più

Section 4: Tailboom Covers

1 Product, 0 Photos

UH12-130

COPERTURA TAILBOOM (a poppa della copertura del motore)

$ 470.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).

Product Description................................................................................................................................

The Tailboom Cover details vary by model, but generally the helicopter tail boom cover encloses the tail boom from the "bottleneck" to the aft end. They usually also cover the horizontal stabilizers, and are custom made to allow for antennae, lights, and other protrusions. They attach with straps underneath the tail boom. Covers for the vertical and horizontal stabilizers are also available separately. Specific information for each model is available on request.... per saperne di più

Section 6: Miscellaneous Products

1 Product, 0 Photos

UH12-121

PARTICLE SEPARATOR COVERS (Soloy) (set di 2)

$ 90.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Section 7: Light Weight Products: Travel Covers and FlyAway Covers

2 Products, 0 Photos

UH12-800

COPERTURA DI VIAGGIO, copertura leggera per bolle di viaggio (MODELLO 12B)

$ 715.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Hiller 12B & 12E Lightweight Travel Bubble Cover is the same design as our standard bubble cover, but the material used is very lightwieight and will fold up and store in a smaller space.... per saperne di più

Travel Covers are made with Silver Solution-Dyed Polyester fabric and fully lined over the entire cover. The material is lightweight and more compact for easy stowage in the aircraft. The polyester material is water resistant, but only intended for occasional use outside. We also have an ultra lightweight material available for fitted hangar dust covers. For daily outdoor use, the non-travel Sunbrella Cover is the best choice.... per saperne di più

UH12-810

COPERTURA DI VIAGGIO, copertura leggera per bolle di viaggio (MODELLO 12E)

$ 715.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • Il marchio di registrazione dell'aeromobile (negli Stati Uniti: il numero N) può essere stampato su questo prodotto per ulteriori $ 25 (entrambi i lati).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Hiller 12B & 12E Lightweight Travel Bubble Cover is the same design as our standard bubble cover, but the material used is very lightwieight and will fold up and store in a smaller space.... per saperne di più

Travel Covers are made with Silver Solution-Dyed Polyester fabric and fully lined over the entire cover. The material is lightweight and more compact for easy stowage in the aircraft. The polyester material is water resistant, but only intended for occasional use outside. We also have an ultra lightweight material available for fitted hangar dust covers. For daily outdoor use, the non-travel Sunbrella Cover is the best choice.... per saperne di più

Non potete trovare quello che state cercando? Probabilmente noi lo produciamo!
I nostri uffici sono attualmente chiusi per I nostri uffici sono chiusi per la giornata.. Invia una email a bruce@aircraftcovers.com con informazioni sul tuo aereo e il prodotto che stai cercando!